Description: Default mode when your turn
on. Displays day of the week, current time
and calendar date.
To Access: Under Menu, press Mode
Button to select Watch mode or press
Power Button to go back to default.
Events during this function:
1. When dive computer is not being used
or the G-Sensor does not sense
movement after preset time, Auto
Power Off functions will apply and it will
go to Standby Status (blank screen). To
change the preset time, please check
page 33 for Power Auto Off.
2. When the computer is not used for a
longer period of time (24 hours.) it will
go to Sleep Status for better battery
management.
3. Under Standby Status, you may wake
up dive computer by twisting it over 45
degrees to activate the G-Sensor, or
press any button.
4. Under Sleep Status, you can only turn
on dive computer by pressing the
power button. All the settings and data
will remain in memory.
WARNING: Always check your dive
computer status before your dive. If
dive computer is under Sleep Status,
it will NOT start automatically when
you enter water.
To Next Page
Loading...