Crest Audio CR-4 - Synchronization Mode

38
1.9 Synchronization Mode
1.9 Synchronization Mode
Description: Synchronization Mode
(Sync Mode) - Waiting for connection
To Access: Under Menu, press Mode
Button to select Synchronization Mode
(Sync Mode).
To Exit: Press Power Button once.
Note:
1. You may enter Synchronization Mode
on dive computer first and operate the
rest of the process from your device
App.
2. Dive computer will automatically go
back to Watch Mode if there’s no
connection in a few minutes.
Description
: Synchronization Mode
(Sync Mode) -
Connected
To Access: Under Menu, press Mode
Button to select Synchronization Mode
(Sync Mode).
To Exit: Press Power Button once.
Note: Indicates that a wireless
connection has been established and
information can be transferred. Once
information transfer is completed you
may exit any APP that is connected to
dive computer. Once it is disconnected,
dive computer will go back to the
waiting for connection status.