Description: All Reset (Reset all
settings and clear all data)
To Access: From SETTINGS, press the
UP Button / DOWN Button until the cursor
aligns with ALL RST. Press MODE Button
once.
One of the ALL RST options will be
blinking at the bottom. Press UP Button /
DOWN Button to select other options as
needed. Press MODE Button to accept
your selection.
Options: ON / OFF
Note:
1. By resetting all, all the custom
settings will be erased and all
settings will be reset as default.
2. All logs will be deleted permanently.
There is no way to retrieve them.
WARNING:
3. Residual nitrogen records will be
cleared and reset. Previous diving
logs will NOT be calculated. Please
make sure you fully understand that
changing this setting will affect
algorithm calculations and the related
risks. DO NOT USE this function if
you are not a certified diving
instructor or you are not suggested to
do so by a certified diving instructor
or facility.
To Next Page
Loading...
