EasyManua.ls Logo

Crest Audio PRO II SERIES 8002 - Technical Specifications; Power Output Ratings; Frequency Response and Bandwidth; Distortion and Damping Factor

Crest Audio PRO II SERIES 8002
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
*A4400059*
v. 2.1 9/17/98
1kHz, 0.01% THD+N 20Hz–20kHz, 0.1% THD+N
800W 750W
1400W 1350W
2000W 1900W
2800W 2700W
4000W 3800W
92V rms, 130V peak each channel
20Hz–20kHz, +0 / -0.3dB,-3dB@135kHz
20Hz–20kHz, +0 / -0.23dB
<0.05% rated power @ 4, 1kHz
<0.01% rated power @ 8, 60Hz and 7kHz
400:1 10400Hz @ 8
>60dB @ 1kHz
.775V constant sensitivity, x20 or x40 constant gain
>20kΩ balanced, >10kΩ unbalanced
-110dB, A-weighted below rated power
> -80dB @ 1kHz below rated power
H
two versions: 90–255 or 180–255 vac @ 50–60Hz factory configured
PowerLok power supply with active power factor correction
36A @ 120V
<7.7A @120V
<17.3A @120V
<1.5A @120V
51A
2083 BTU/Hr
3899 BTU/Hr
back-to-front via two rear-mounted variable-speed DC fans
female and male xlr pin 2+
switch-configurable for pin 3+
Speakon connectors and five-way output binding posts
front panel: two attenuators, power switch incorporating magnetic circuit breaker
rear panel: signal ground-lift, mode select, input sensitivity, pin 2/3+ switches
acl, signal, status
bi-color: active / protect
acl, igm, autoramp, short circuit, dc voltage, turn-on/-off transient,
current in-rush, sub/ultrasonic input
aluminum chassis double thickness in rack-ear areas
5.25” x 19” x 18” 133 x 483 x 457mm
height x width x depth
gross: 47lbs 21.7kg
net:
42lbs 19.1kg
five years USA, Canada, United Kingdom, and many other countries
specifications
Crest Audio Inc.
100 Eisenhower Dr., Paramus NJ 07652 USA
TEL: 201.909.8700 FAX: 201.909.8744
http://www.crestaudio.com
Architech’s specifications for this model
and other product information is available
in downloadable PDF format
at www.crestaudio.com
Power figures are watts per channel,
both channels driven.
©
¹⁹⁹⁸
crest audio inc.
Crest Audio reserves the right to make
improvements in manufacturing or design
which may affect specification.
8002 power amplifier
stereo power 8
4
2
bridged mono power 8
4
maximum output voltage
frequency response
1W @ 8
power bandwidth rated power @ 4, 1% THD+N
THD
+
N
SMPTE IMD
damping factor
input
CMRR
switch-configurable input options
input impedance
hum and noise
crosstalk
class
Power supply
Circuit breaker rating
Current draw
1/8 power, 4
1/3 power, 4
at idle
Peak current draw
thermal emissions
1/8 Power, 4
1/3 Power, 4
cooling
input connectors
output connectors
controls
LED indicators
TourClass
®
protection
construction
dimensions
weight
warranty
rear view 8002

Related product manuals