Crest Audio X-Four - Rear Panel Features

p. 39
stereo input module
rear panel features
The stereo line-input module provides connectors for three stereo line-
level signals.
see—line 2 switch.
balanced left and right line-in XLR connectors
These two jacks accept balanced or unbalanced +4dB line level signals.The
LINE
2 switch on front-panel must be disengaged for these connectors to
be active.
line-input left and right
1/4" TRS jacks
These two jacks accept balanced or unbalanced line level signals.The LINE
2
switch on front panel must be engaged for these jacks to be active.
line-input left and right
RCA connectors
These two jacks accept unbalanced line-level signals.They are active when
the
LINE 2 switch on front-panel is engaged and nothing is plugged into the
corresponding left or right
1/4" TRS jack(s).
F
2