Crest Audio X-Four - Rear Panel Features

p. 79
master module
rear panel features
insert points—left, right, and mono
Separate 1/4" TRS jacks provide the ability to insert external signal proces-
sor into the signal paths of the left, right and mono
MASTERS.
insert sends—left, right, and mono
These jacks connect to the input of signal processors.The sig-
nals are derived after the left, right and mono summing amplifiers.
insert returns—left, right, and mono
These jacks connect to the outputs of a signal processors.They
can accept balanced or unbalanced signals.
DC
power-in
This jack connects the power supply cable to the console.
5
Plugging a 1/4" plug
into this jack does not
break the internal signal
flow of the respective left,
right, and mono masters.
+
Plugging a 1/4" plug
into this jack breaks
the signal flow
of the respective left, right,
and mono masters.
+