p. 51
group module
group/aux level features
signal/peak LED
’s
This dual color
LED responds to the pre-fader signal. It illuminates
green with varying brightness in proportion to the audio signal.When the
signal approaches clipping, the
LED illuminates red.
talk to—fader 1–4
This switch adds the
TALKBACK system output to the fader signal.The
level of the
TALKBACK signal is set by the TALKBACK level control in the MAS-
TER section.
fader
The fader normally controls the level at which the
GROUP signal is sent to
any assigned buses or outputs. When the
REVERSE AUX/GROUP switch is
selected, the fader controls the level of the
AUX output.
after-fader listen—AFL
Pressing this switch will include or exclude the fader signal (when not
illuminated).
To Next Page
Loading...
