p. 49
group module
group assignment features
mono assignment—from group—
MONO
The GROUP signal is assigned to the discrete mono bus.
left/right assignment—from group—
L/R
The
GROUP signal is assigned to the main left and right output buses.
pan
The PAN pot is used to position the group signal within the stereo left
/ right field.The signal must be assigned to left and right in order for the
PAN
control to have any effect.
mute
see—mono input module for full description
This is a useful fea-
ture when the mixer is
being used to feed on-stage
or in-ear monitors.
A red LED visually indicates
when this feature has been
selected.
There is one switch for each
of the six AUX MASTERS /
GROUP MASTERS
.
+
3
To Next Page
Loading...
