Crest Audio X-Four - Left Master Features

p. 69
master module
left master features
signal/peak LED—SIG/PEAK
This dual-color
LED responds to the left pre-fader signal. It illuminates
green with varying brightness in proportion to the audio signal.When the
signal approaches clipping, either pre- or post-fader, the
LED illuminates red.
talkback left/right—TALK TO
The
TALKBACK system output is added to the left and right MASTER
outputs.The level of the TALKBACK signal is set by the TALKBACK level con-
trol in the
MASTER section.
sum left/right—SUM L/R
The main left and right signals are summed together as a mono sig-
nal and appear at the left- and right-output balanced male XLR connectors
on the rear-panel.
The Main Left and Right signals appear in stereo at the left- and right-
output balanced male XLR connectors on the rear-panel.
left master fader
This fader governs the main left output level.
after-fader listen—AFL
When this switch is depressed, the left post-fader signal is sent to the
console solo system.
LED
5