• If the LIGHTBULB icon with the letter „a“ is flashing and you push the “▼“ key the
LIGHTBULB icon will move downward and will show the letter „b“.
• In the “b” mode the backlight color will change with the weather forecast :
The display color will be LIGHT GREEN when the weather is SUNNY ➔ RED when the
weather is PARTLY CLOUDY ➔GREEN when the weather is CLOUDY ➔ BLUE when the
weather shows RAIN CHANCE ➔PURPLE when the weather shows STORM CHANCE
• If you prefer this setting please press the “MODE “ button confirm
• If the LIGHTBULB icon with the letter „b“ is flashing and you push the “▼“ key the
LIGHTBULB icon will move downward and will show the letter „c“.
• In the “c” mode the backlight color will change with the outdoor temperature:
• If the temperature is Above 30°C is will show RED If the temperature is between
➔25~29.9°C it will show LIGHT GREEN ➔ If the temperature is between 20~24.9°C it will
show GREEN ➔ If the temperature is between 10~19.9°C it will show WHITE ➔ If the
temperature is between 0~9.9° it will show LIGHT BLUE ➔If the temperature is between
-0.1°C ~-9.9°C it will show BLUE ➔If the termperatue is Below -10°C it will show PURPLE.
If you prefer this setting please press the “MODE “ button to confirm
⚫ Default: Without RF, the backlight color will display RED; When the RF is received, the
corresponding color is displayed.
⚫ In any mode, press the ”MODE” and “▼
”
keys at the same time to enter into the automatic
color change, Each color shows 7 seconds in an automatic cycle, Manually press
“MODE“ to confirm the color, and quit the automatic change mode. The program does
not set the automatic exit.
Backlight color switch:
RED
➔GREEN➔BLUE➔LIGHT GREEN➔PURPLE➔LIGHT BLUE➔WHITE➔RED......
• When you are in the “b” or “c” mode, if you hold „MODE” and the “▼
” key
at the same
time, the b or c mode will be stopped .
• If you operate the base station with batteries only the backlight will lighten up for 10
seconds when you press the ”SNOOZE
/
LIGHT” button and will then switch off in order to
save the batteries.
TEMPERATURE, HUMIDITY AND AIR PRESSURE TRENDS
⚫ The arrows in the display show the trends of the values of the temperature and the
humidity measurements on both the outdoor sensor or base station.
Indications on the
display
To Next Page
