Crestron C2ENET-1 User Manual

2-Series Ethernet Interface Expansion Cards Crestron C2ENET-1/-2
Error Window
Setting a Control System Ethernet Password
After establishing communication with a control system via Ethernet, the Viewport
may be used to set (or change) a password to limit access to the control system.
NOTE: The Ethernet password protects console communications (file transfer,
diagnostics, etc.), it does not prevent users from browsing web pages.
Do the following to set a password:
1. In Viewport, select Functions | Set TCP/IP Console Password. The
“Enter New Password” window opens (refer to subsequent graphic).
Viewport Set TCP/IP Control Password option
2. Enter and verify a new password and click OK.
“Enter New Password” Window
12 • 2-Series Ethernet Interface Expansion Cards: C2ENET-1 & C2ENET-2 Operations & Installation Guide – DOC. 5962B

Crestron C2ENET-1 Specifications

General

Brand	Crestron
Model	C2ENET-1
Category	Computer Hardware
Language	English