2-Series Ethernet Interface Expansion Cards Crestron C2ENET-1/-2
Programming with VT Pro-e
Information on creating web pages using VT Pro-e is in the VT Pro-e help file under
the section “Web Browser Projects.”
For e-Control projects:
When an e-Control browser project is created, VT Pro-e automatically creates a
folder with the name of the project and a .web extension. This web project folder
itself contains a Java subfolder, in addition to all the HTML files that are sent to the
MP2E. In VT Pro-e, the target type is BROWSER.
For e-Control 2 projects:
When an e-Control 2 project is created, VT Pro-e automatically creates a folder with
the name of the project and a .xweb extension. The web project folder contains all
the necessary e-Control 2 files. In VT Pro-e, the target type is XPANEL.
In designing and creating a browser project, keep in mind that you must assign an IP
ID to all the project pages and specify the IP address of the control system. (For
further information on this procedure, refer to the VT Pro-e online help file.)
Uploading Web pages
The AV2/PRO2 provides a built-in Web server for e-Control applications. The
AV2/PRO2 allots 2.5 MB of memory for “user files” such as Web pages, mailbox,
and the compiled SPZ file. Web pages are loaded in the AV2/PRO2 using Viewport.
Refer to the “Uploading Web Pages” section within the latest version of the Crestron
e-Control
®
Reference Guide (Doc. 6052) for more information.
18 • 2-Series Ethernet Interface Expansion Cards: C2ENET-1 & C2ENET-2 Operations & Installation Guide – DOC. 5962B
To Next Page
Loading...
Need help?
General
