Assign the RF Channel
Before use, assign an RF channel for SG wireless communications and
an RF channel for infiNET EX and ER wireless communications. To select
the best RF channel, perform an energy scan. For details, refer to
Settings in the product manual.
To assign the RF channel on the gateway, use the Web UI or the
EasyConfig tool in Crestron Toolbox™ software. For details, refer to
Configure the Gateway or Crestron Toolbox Help.
When selecting an RF channel for SG wireless communications, consider
the following:
l
Each SG wireless gateway in the space must use a different RF
channel.
l
SG devices set their RF channel to match the RF channel set on the
gateway. If the SG RF channel on the gateway is changed, the SG
device automatically updates its RF channel to match the gateway.
l
SG devices do not operate within the Wi-Fi® wireless spectrum.
When selecting an RF channel for infiNETEX®andERwireless
communications, consider the following:
l
infiNETEXand ER wireless communications use the same RF
channel.
l
The default and recommended RF channel is 15.
l
infiNETEXdevices set their RF channel to match the RF channel set
on the gateway. If the infiNETEXandERRF channel on the gateway
is changed, the infiNETEXdevice automatically updates its RF
channel to match the gateway.
l
ER devices must have their RF channel assigned manually prior to
joining the network. If the infiNETEXandERRFchannelonthe
gateway is changed, the ER device must have its RF channel manually
changed to match the gateway.
l
infiNETEXand ER operate within the Wi-Fi® wireless spectrum. For
best performance, do not select an RF channel that is within a Wi-Fi
channel. Refer to the table below for details.
RFChannel(s)
Within Wi-Fi
Channel
Adjacent toWi-Fi
Channel
11 - 14 1 -
15 (Default,
Recommended)
- 1, 6
16 - 19 6 -
20 (Recommended) - 6, 11
21 - 24 11 -
25 - 11
26 - -
5
CEN-GW1 and CENI-GW1
QuickStart
Universal Wireless Gateway - ER, SG, and infiNETEX® Wireless Networks