Crestron CEN-HPRFGW High Powered RF Gateway
• If necessary, double click a device to open the “Device Settings”
window and change the Net ID or IP ID, as shown in the following
figure(s).
“CEN-HPRFGW Device Settings (Cresnet)” Window
“CEN-HPRFGW Device Settings (Ethernet)” Window
• The ID code specified in the SIMPL Windows program must
match the Net ID or IP ID of each unit. Refer to “Identity Code”
which starts on page 10.
Operations & Installation Guide – DOC. 6587B High Powered Gateway: CEN-HPRFGW • 17
To Next Page
Loading...
