Crestron DIN-DALI-2 - Page 19

Crestron DIN-DALI-2 DIN Rail 2 Channel DALI Interface
Programming Guide – DOC. 7365A DIN Rail 2 Channel DALI Interface: DIN-DALI-2
•
17
Standard Commands
COMMAND
NUMBER
ADDRESS COMMAND/DATA COMMAND NAME
- YAAAAAA0 XXXX XXXX DIRECT ARC POWER CONTROL
0 YAAAAAA1 00000000 OFF
1 YAAAAAA1 00000001 UP
2 YAAAAAA1 00000010 DOWN
3 YAAAAAA1 00000011 STEP UP
4 YAAAAAA1 00000100 STEP DOWN
5 YAAAAAA1 00000101 RECALL MAX LEVEL
6 YAAAAAA1 00000110 RECALL MIN LEVEL
7 YAAAAAA1 00000111 STEP DOWN AND OFF
8 YAAAAAA1 00001000 ON AND STEP UP
9–15 YAAAAAA1 00001XXX RESERVED
16–31 YAAAAAA1 0001XXXX GO TO SCENE
32 YAAAAAA1 00100000 RESET
33 YAAAAAA1 00100001 STORE ACTUAL LEVEL IN THE DTR
34–41 YAAAAAA1 0010XXXX RESERVED
42 YAAAAAA1 00101010 STORE THE DTR AS MAX LEVEL
43 YAAAAAA1 00101011 STORE THE DTR AS MIN LEVEL
44 YAAAAAA1 00101100 STORE THE DTR AS SYSTEM FAILURE LEVEL
45 YAAAAAA1 00101101 STORE THE DTR AS POWER ON LEVEL
46 YAAAAAA1 00101110 STORE THE DTR AS FADE TIME
47 YAAAAAA1 00101111 STORE THE DTR AS FADE RATE
48–63 YAAAAAA1 0011XXXX RESERVED
64–79 YAAAAAA1 0100XXXX STORE THE STR AS SCENE
80–95 YAAAAAA1 0101XXXX REMOVE FROM SCENE
96–111 YAAAAAA1 0110XXXX ADD TO GROUP
112–127 YAAAAAA1 0111XXXX REMOVE FROM GROUP
128 YAAAAAA1 10000000 STORE DTR AS SHORT ADDRESS
129–143 YAAAAAA1 1000XXXX RESERVED
144 YAAAAAA1 10010000 QUERY STATUS
145 YAAAAAA1 10010001 QUERTY BALLAST
146 YAAAAAA1 10010010 QUERY LAMP FAILURE
147 YAAAAAA1 10010011 QUERY LAMP POWER ON
148 YAAAAAA1 10010100 QUERY LIMIT ERROR
149 YAAAAAA1 10010101 QUERY RESET STATE
150 YAAAAAA1 10010110 QUERY MISSING SHORT ADDRESS
151 YAAAAAA1 10010111 QUERY VERSION NUMBER
152 YAAAAAA1 10011000 QUERY CONTENT DTR
153 YAAAAAA1 10011001 QUERY DEVICE TYPE
(Continued on following page)