DIN Rail 2 Channel DALI Interface Crestron DIN-DALI-2
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, Cresnet and Crestron Toolbox are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United
States and/or other countries. Lutron and EcoSystem are either trademarks or registered trademarks of Lutron Electronics, Inc. in the United States
and/or other countries. Other trademarks, registered trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for
errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2013 Crestron Electronics, Inc.
Contents Programming Guide – DOC. 7365A
Contents
DIN Rail 2 Channel DALI Interface: DIN-DALI-2 1
Introduction ............................................................................................................................... 1
Operation of the DIN-DALI-2 ................................................................................................... 2
Power Supplies ............................................................................................................ 2
Communication with Ballasts ...................................................................................... 2
DALI Wiring Considerations ...................................................................................... 3
Ballast and DIN-DALI-2 Replacement ..................................................................................... 4
Ballast Replacement .................................................................................................... 4
DIN-DALI-2 Replacement .......................................................................................... 6
Advanced DALI Console Commands ....................................................................................... 7
Discovering what is on the DALI Loop ...................................................................... 7
Viewing the DIN-DALI-2’s Stored Memory .............................................................. 8
Addressing Ballasts ................................................................................................... 11
Constructing DALI Packets ....................................................................................... 11
Clearing out the DIN-DALI-2 Internal Memory ..................................................................... 15
Appendix A: DALI Protocol Summary ................................................................................... 16
Appendix B: Ballast Address to Hex Translation .................................................................... 19
Glossary ................................................................................................................................... 20
To Next Page
Loading...
