Crestron DM NVX Series Quick Start

3. Finger-tighten the two captive panel screws to secure the card—do
not overtighten the screws.
Connect the Card
Connect the card as required for the application.
NOTES:
l The cards can be configured to use either the DEVICE port or the
HOST port. Both ports cannot be used simultaneously.
l The DM-NVX-350C and DM-NVX-351C each provide three LAN
ports. LAN ports 1 and 2 are 100BASE-TX/1000BASE-T ports.
LANport 3 is an SFP port.
l The DM-NVX-352C provides two LAN ports. LAN port 1 is a
100BASE-TX/1000BASE-T port. LAN port 2 is an SFP port.
l An SFP port connects to a fiber-optic network using the
appropriate Crestron SFP-1G Series transceiver module (sold
separately). For information about installing a Crestron SFP-1G
transceiver module, refer to the SFP-1G Series Installation Guide
(Doc. 7979) at www.crestron.com/manuals.
l Only one LAN port at a time can be used as the primary LAN
connection to a 1000BASE-T switch in order to stream network
video. Any other LAN port can then be used for connection to a local
network device or to another DM NVX device.
2
DM-NVX-350C, DM-NVX-351C, and DM-NVX-352C
QuickStart
DM NVX® 4K60 4:4:4 HDR Network AV Encoder/Decoder Cards

Crestron DM NVX Series Specifications

General

Latency	<1 Frame
Dimensions	Varies by model
Weight	Varies by model
Video Input	HDMI
Video Output	HDMI
Audio Formats	PCM, Dolby Digital, DTS
Audio Inputs	HDMI, Analog
Audio Outputs	HDMI, Analog
Control	Crestron Control System
HDCP	HDCP 2.2
Security	AES encryption