Crestron DM-RMC-200-C User Manual

DigitalMedia 8G+™ Receiver 200 Crestron DM-RMC-200-C
LAN Connectivity
Along with high-definition AV and control, DigitalMedia also integrates high-speed
Ethernet networking for a total signal distribution solution. The DM-RMC-200-C
includes a 10BASE-T/100BASE-TX Ethernet port, providing a convenient LAN
connection for a local network device.
Keyboard/Mouse Extender
The DM-RMC-200-C also functions as a keyboard/mouse extender, allowing a USB
HID-compliant keyboard and/or mouse to be connected at the display location, and
used to control a computer or other component located at the central equipment rack
or some other location.
Embedded Device Control
The DM-RMC-200-C includes built-in RS-232, IR, and Ethernet control ports to
allow programmable control of the display device connected to it. It can also provide
an alternative to these conventional control methods by harnessing the CEC
(Consumer Electronics Control) signal embedded in HDMI. Through its connection
to the control system, the DM-RMC-200-C provides a gateway for controlling the
display device right through the HDMI connection, potentially eliminating the need
for any dedicated control wires or IR probes.
Two low-voltage relay ports are also included on the DM-RMC-200-C for control of
a projection screen or lift. In addition, there are two discrete digital input ports to
accommodate room occupancy sensors, power sensors, or contact closures for
enhanced automation and monitoring.
Low-Profile Installation
Its low-profile design makes the DM-RMC-200-C perfect for installation behind a
flat-panel display or above a ceiling-mounted projector. It mounts to a standard
2-gang US, UK, or European electrical box using the mounting bracket provided.
The bracket includes a convenient holder for the external power pack, providing for
a clean installation that protrudes only 1.6 inches (~41 mm) from the mounting
surface.
Connections for the display device are all positioned along the top and bottom of the
unit for a clean, serviceable installation. The DigitalMedia and relay connections are
provided on the rear panel within the electrical box. Speakers may be connected to
either the top panel or the rear. One of the digital input control ports is located on the
rear panel, with the other provided on the bottom. An array of indicators is provided
on the front of the DM-RMC-200-C for easy setup and troubleshooting.
4 • DigitalMedia 8G+™ Receiver 200: DM-RMC-200-C Operations & Installation Guide – DOC. 7126B

Crestron DM-RMC-200-C Specifications

General

Type	AV receiver
Material	Metal
Product color	Black
Maximum resolution	2048 x 1152 pixels
Maximum refresh rate	60 Hz
Ethernet LAN	Yes
RJ-45 input ports	1
Connectivity technology	Wired
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	47 mm
Width	276 mm
Height	202 mm
Weight	1480 g