Isys™ 5.7” Tilt Touchpanel Crestron TPS-6
Touch RETURN again to go back to the TOUCHPANEL menu or touch
GRAPHICS to enter the GRAPHICS SETUP menu, shown in the following
illustration.
GRAPHICS
GRAPHICS SETUP Menu
The GRAPHICS SETUP menu provides controls to set the Dynamic Graphics
Loading Icon Position as well as a button to disable the loading icon(s), depending
on user preference.
There are also Page Flips use Backbuffer Enable and Disable buttons. When
enabled, new pages are drawn in the backbuffer and displayed when fully drawn.
When disabled, new pages will be drawn on the screen from top to bottom.
Press RETURN to go back to the TOUCHPANEL menu. After touchpanel
parameters have been set, touch RETURN to go back to the SETUP MODE menu or
the MAIN MENU.
26 • Isys™ 5.7” Tilt Touchpanel: TPS-6 Operations Guide – DOC. 6945A
To Next Page
Loading...
Need help?
General
