Crestron Isys TPS-6 User Manual

Crestron TPS-6 Isys™ 5.7” Tilt Touchpanel
When all settings have been entered, touch RETURN to go back to the main
ETHERNET SETUP menu and touch Reboot required for setting to take effect.
Reboot Now.
After communications parameters have been set, touch RETURN to go back to the
SETUP MODE menu or MAIN MENU.
TOUCH PANEL
From the SETUP MODE menu, touch the TOUCH PANEL button to enter the
TOUCHPANEL menu.
TOUCHPANEL Menu
The TOUCHPANEL menu offers access to BACKLIGHT SETUP and GRAPHICS
SETUP menus as well as pairs of – and + controls to set the Button Backlight
Timeout and Standby Timeout.
The Restore Default Settings button will reset the Timeout and Brightness settings to
their factory configuration.
When enabled, System Messages will display gateway or control system disconnect
warnings.
When enabled, Display on from Hardkey causes the display to turn on along with the
touchpanel at the press of any key on the front of the touchpanel.
Operations Guide – DOC. 6945A Isys™ 5.7” Tilt Touchpanel: TPS-6 • 23

Crestron Isys TPS-6 Specifications

General

Brand	Crestron
Model	Isys TPS-6
Category	Touch Panel
Language	English