Crestron TSW-552 User Manual

5”/7”10.1” Touch Screens Crestron TSW-552/752/1052
4
•
5”/7”/10.1” Touch Screens: TSW-552/752/1052 Configuration Guide – DOC. 7578A
To edit the Static IP Address, Static Subnet Mask, Static Default Router, Preferred
DNS, or Alternate Preferred DNS, touch the button directly under the label for the
entry to edit. The on-screen numeric keypad opens.
On-Screen Numeric Keypad
Use the keypad to make the new entry. Touch the “x” in the text field to clear any
previous entry. Touch
to delete the last digit. Touch Save to save a new entry
or
to return to the “Ethernet Setup – Static IPs” screen.
After new settings have been saved, touch Reboot Required to Apply IP Changes
on the “Ethernet Setup – Static IPs” screen to reboot the touch screen, so the new
settings can take effect.
If not making any changes, touch
to return to the “Ethernet Setup” menu.
Touch
again to return to the “TSW-x52 Setup” menu.

Crestron TSW-552 Specifications

General

Brand	Crestron
Model	TSW-552
Category	Touchscreen
Language	English