Crestron TSW-750 - IP Table Setup

5”/7”10.1” Touch Screens Crestron TSW-550/750/1050
4 • 5”/7”/10.1” Touch Screens: TSW-550/750/1050 Configuration Guide – DOC. 7366C
On-Screen Numeric Keypad
Use the keypad to make the new entry. Touch the “x” in the text field to clear any
previous entry. Touch
to delete the last digit. Touch Save to save a new entry
or
to return to the “Ethernet Setup – Static IPs” screen.
After new settings have been saved, touch Reboot to Apply Changes on the
“Ethernet Setup – Static IPs” screen to reboot the touch screen, so the new settings
can take effect.
If not making any changes, touch
to return to the “Ethernet Setup” menu.
Touch
again to return to the “Setup” menu.
IP Table Setup
On the “Setup” menu, touch IP Table Setup to display the “Ethernet Setup – IP
Table” menu.
“Ethernet Setup –IP Table” Menu