CrimeStopper Cool Start RS1-G5 - User Manual

RS1-G5, RS3-G5, RS4-G5
RS4-G5 FM (1-Way System)
RS7-G5 FM (2-Way Paging System)
REMOTE START SYSTEM
OPERATING INSTRUCTIONS
CONGRATULATIONS on your choice of a Cool Start™ Remote Engine Starter and Keyless Entry with DP
Technology by Crimestopper Security Products Inc. This booklet contains the information necessary for operating
your system. If any questions arise, contact your installation dealer or Crimestopper Security Products Inc.
The RS1-G5, RS3-G5 & RS4-G5 system comes with (2) 1-way AM remotes
The RS4-G5 FM system comes with (2) 1-way FM remotes.
The RS7-G5 FM system comes with a 2-Way LCD Pager and a 1-Way FM remote.
OPTIONAL Features are to be connected only if desired or agreed upon by the customer and the installing dealer
i.e. Door Locks, Trunk Pop, Dome Light Illumination, Horn-Honk, Anti-Grind, etc. These features may also require
additional parts and/or labor fees. Consult with your installer beforehand to be sure of what is going to be installed
with your particular system.
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
REV 07-2014
This device complies with FCC Rules part 15. Operation is
subject to the following two conditions: 1) This device may not
cause interference, and (2) this device must accept any
interference that may be received, including interference that
may cause undesired operation. The manufacturer is not
responsible for any radio or TV interference caused by
unauthorized modification to this equipment. Such modification
could void the user's authority to operate the equipment.

Summary

Crimestopper Remote Start System Overview

Product Model Descriptions

Details the different system models and their remote capabilities, including 1-Way and 2-Way systems.

Optional System Features

Lists additional features that can be connected based on customer and installer agreement.

Manufacturer and FCC Compliance

Provides company contact information and FCC compliance statement for the device.

Operation Cautions and Warnings

Manufacturer Liability and Owner Responsibilities

Outlines manufacturer non-liability and lists the owner's sole responsibilities for system operation and safety.

Garage Safety Warning

Crucial warning against remote starting in closed garages due to Carbon Monoxide fume risk.

Using the Remote Control

RS1-G5 Single-Button Remote

Explains the functionality and operation of the single-button remote control for the system.

RS3-G5 Four-Button Remote

Details the operation of the 4-button remote control, including Lock, Unlock, Vehicle Select, and Start.

Remote Start Activation Options

Describes the configurable options for activating the remote starter via button press.

Using the 5-Button Remote Control

5-Button Remote Layout and Functions

Illustrates the buttons and their functions on the 5-button remote, including AUX outputs.

Remote Valet Configuration

Explains the options for setting up the Remote Valet feature, including default settings.

Using the 2-Way Pager Transmitter

2-Way Pager LCD Screen Icons

Explains the various icons displayed on the 2-way pager's LCD screen.

2-Way Pager Side Buttons

Describes the functions of the buttons located on the side of the 2-way pager transmitter.

2-Way Pager Power Functions

Details how to turn the 2-way pager transmitter on and off.

2-Way Pager Battery Charging

Instructions on how to charge the battery for the 2-way LCD pager remote using a USB cable.

Setting the 2-Way Pager Clock

Step-by-step guide to set the clock on the 2-way LCD remote control.

Remote Beep and Vibrate Selection

Configurable Sound and Vibration Modes

Explains how to select different modes for beep and vibration feedback on the 2-way pager.

Remote Engine Control

Status LED Indicator

Details the operation and meaning of the system's status LED indicator.

Remote Start Activation Methods

Describes the configurable options for activating the remote starter via button press.

Successful Remote Start Procedure

Step-by-step guide on how to successfully start the vehicle using the remote control.

Unsuccessful Remote Start Handling

Explains what happens if the engine fails to start on the first attempts and automatic restart limits.

Turning Off Remote Started Engine

Instructions on how to stop the vehicle's engine when it is running via remote start.

Entering a Remotely Started Vehicle

Procedure for safely entering and taking control of a vehicle started by the remote.

Remote Start Run Time Reset

How to reset the engine run timer to allow for extended running time after a remote start.

Locking During Remote Start Abort

Configuration options for automatic door locking during remote start abort or time-out.

Idle Down Mode Operation

Enables the vehicle to remain running after ignition key removal, with programmable run times.

Exiting Vehicle in Idle Down Mode

Steps to exit the vehicle while it remains running in Idle Down mode.

Idle Down Infinity Run Mode

Allows the engine to run indefinitely without the ignition key for extended periods.

Selectable Hourly Cold-Start Mode

Allows the vehicle to self-start automatically at set hourly intervals for cold conditions.

Timed Self-Start Mode Setup

Procedure for programming the vehicle to start automatically at hourly increments.

Resetting Timed Self-Start Mode

How to reset or disable the timed self-start mode by starting the vehicle with the key or remote.

Turbo Timer Mode

Activating Turbo Timer Function

Instructions on how to activate the optional Turbo Timer mode for turbo vehicle cool-down.

Manual Transmission Mode

Manual Transmission Exit Procedures

Details the safety check-out procedures for exiting the vehicle in manual transmission mode.

Turbo Timer with Manual Transmission

Explains how the Turbo Timer functions when used with the manual transmission mode.

Remote Panic Feature

Description of the panic feature that activates the vehicle horn and parking lights.

Convenience and Safety Features

Keyless Entry Functionality

Enables remote locking and unlocking of vehicle doors, potentially requiring a data module.

Automatic Door Locking;Unlocking

Configures automatic door lock/unlock based on driving or ignition status.

Horn Chirp Confirmation

Provides audible confirmation chirps for system actions like lock, unlock, and remote start.

OEM Alarm Interface

Integrates the system with factory equipped security systems, possibly needing a data module.

Remote Trunk Release & Dome Light

Allows remote trunk opening or illuminates interior dome light upon unlocking the vehicle.

Valet Mode Activation

Instructions on how to manually or remotely activate and deactivate Valet Mode.

Hood Open Safety Feature

Prevents remote starting if the vehicle's hood is open, ensuring safety.

Brake Pedal Reset Safety

Ensures the vehicle stops immediately if the brake pedal is pressed while remotely started.

Transmitter Programming

Programming the 1-Button Remote

Step-by-step guide for learning transmitter codes for the 1-button remote.

Programming 4 & 5-Button Remotes

Instructions for learning transmitter codes for the 4 and 5-button remotes.

2-Vehicle Operation

Setting Up 2-Vehicle Operation

Guide to programming remotes to control a second vehicle with the Crimestopper system.

Important Notes for 2-Vehicle Use

Key information and icons related to managing and receiving pages from two vehicles.

No Factory Keyless Entry After Remote Start

Factory Keyless Entry Compatibility

Explains how new car systems may disable factory keyless entry when ignition is ON during remote start.

Remote Start Diagnostics

Interpreting Diagnostic Codes

Lists flashing LED and parking light codes indicating specific system errors.

Performance in Cold Conditions

Describes how extreme cold may affect remote start attempts and vehicle starting.

Data Port Features

2-Way Data Port

Details the direct data port plug-in for bypass modules, reducing installation complexity.

Smart Phone Interface Port

Explains the port for the MS3 Smart Phone interface module, enabling app-based control.

Battery Replacement

1-Button Remote Battery Replacement

Instructions for replacing the batteries in the 1-button remote control.

4-Button Remote Battery Replacement

Guide for replacing the batteries in the 4-button remote control.

5-Button Remote Battery Replacement

Instructions for replacing the batteries in the 5-button remote control.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document describes the Crimestopper Cool Start™ Remote Engine Starter and Keyless Entry with DP Technology, covering models RS1-G5, RS3-G5, RS4-G5 (1-Way System), and RS7-G5 FM (2-Way Paging System). It functions as a remote engine start and keyless entry system for vehicles, with optional alarm and convenience features.

Function Description:

The core function of this device is to remotely start a vehicle's engine and provide keyless entry. It incorporates "DP Technology" by Crimestopper Security Products Inc. The system allows users to start their vehicle from a distance, pre-condition the cabin (heating or cooling), and lock/unlock doors. Depending on the model, it offers 1-way or 2-way communication with the vehicle. The 2-way paging system (RS7-G5 FM) provides feedback to the remote, displaying vehicle status information on an LCD screen.

Important Technical Specifications:

• Remote Control Types:
  • RS1-G5: Single button remote control.
  • RS3-G5: 4 vertical buttons (Lock, Unlock, Vehicle Select, Start).
  • RS4-G5 FM: 1-way FM remotes.
  • RS7-G5 FM: 2-Way LCD Pager and a 1-Way FM remote.
• Transmitter Codes: The system can learn up to 4 different transmitter codes.
• Battery Type:
  • 1-Button Remote: Two CR-1620 Lithium batteries.
  • 4 & 5-Button Remotes: Two CR-2025 Lithium 3 Volt Batteries.
• 2-Way Pager Communication: Utilizes High Frequency FM signals for long-distance communication, with range varying based on location, terrain, and RF interference.
• Data Port: Includes a 2-Way DATA PORT for Databus Modules to bypass factory immobilizers and operate keyless entry, reducing installation error. It also features a SMART PHONE DATA PORT (white 4-pin plug) for direct data connection to the MS3 Smart Phone interface module (purchased separately), enabling APP-based control.
• Programmable Options: Numerous features are programmable, including remote start activation method (single press, double press, press and hold), remote start run time (5 to 30 minutes, or Infinity Run), horn chirps, auto lock/unlock, and valet mode activation.

Usage Features:

• Remote Engine Start:
  • Activation methods are programmable: single 1/2 second press (default), double press, or press and hold for 2 seconds.
  • Successful start sequence: Parking lights flash once, turn solid, Ignition/Acc circuits turn on, starter motor engages, engine starts, parking lights and Acc turn back on, doors lock.
  • Unsuccessful start: System attempts to restart the engine up to 3 times. If all attempts fail, the system shuts down and doors remain locked.
  • Turning off: Press and release the remote start button (or double press if programmed).
  • Entering a remote-started vehicle: Unlock with remote or key, turn ignition to ON/RUN, press brake pedal to reset the remote starter.
  • Run Time Reset: After a successful remote start, pressing Lock & Unlock buttons together for 2 seconds resets the engine run timer.
• Idle Down Mode: Allows the engine to remain running after the key is removed, for a programmed duration (10, 20, 30 minutes, or Infinity Run). Useful for quick stops or commercial applications.
• Selectable Hourly Cold-Start Mode (1-4 Hours): Programs the vehicle to self-start every 1, 2, 3, or 4 hours for the programmed run time, beneficial in cold conditions.
• Turbo Timer Mode (Optional): Keeps the engine running for 1, 3, or 5 minutes after the key is removed, allowing for turbo cool-down. Activated by pressing the Remote Start button with the brake pedal depressed.
• Manual Transmission Mode: Requires a safety check-out procedure when exiting the vehicle to ensure the transmission is in neutral before remote start can be used. Multiple options for exit procedures are available.
• Keyless Entry: Remotely locks and unlocks vehicle doors. Parking lights flash once for lock, twice for unlock, and stay on for 30 seconds with unlock for illumination.
• Auto Lock / Unlock: Programmable feature to automatically lock/unlock doors based on ignition status or engine RPMs (in Tach mode).
• Horn Chirps: Provides audible confirmation for lock, unlock, and remote start (if connected). Chirp duration is programmable.
• OEM Alarm Interface: Designed to disarm and re-arm factory security systems in conjunction with remote start and keyless entry.
• Remote Trunk Release / Domelight Illumination: Programmable output for remotely opening the trunk or illuminating the interior light for 30 seconds upon unlock. Trunk release activation method is programmable.
• Remote Panic: Pressing the Lock button for more than 2 seconds sounds the vehicle horn and flashes parking lamps for 1 minute.
• 2-Vehicle Operation: Remotes can control a second vehicle with a Crimestopper system installed. The 2-way pager receives pages from both vehicles regardless of the selected vehicle.

Maintenance Features:

• Valet Mode: Disables the remote start function for vehicle servicing or when handing keys to a valet. Can be activated manually via the ignition and valet button, or remotely via the Lock and Unlock buttons (for 3-4 seconds).
• Hood Open Safety: Prevents remote starting when the hood is open (requires hood pin switch). If attempted, parking lights flash twice.
• Brake Pedal Reset: Prevents remote starting or immediately shuts down a remote-started vehicle if the brake pedal is pressed, enhancing safety.
• Remote Start Diagnostics: The system flashes the LED and parking lights one to seven times to indicate specific error codes if remote start fails (e.g., brake switch, hood switch, valet mode, ignition/tach problem, manual transmission error).
• Battery Replacement: Detailed instructions are provided for replacing batteries in 1-button, 4-button, and 5-button remotes, including screw removal and battery orientation.
• 2-Way Pager Battery Charging: The 2-Way LCD remote has a battery charge indicator and charges via a standard Mini USB cable, accessible by sliding a side cover.
• Setting the Clock (2-Way LCD Remote): Instructions for setting AM/PM, hour, and minutes, and for enabling/disabling beep and vibrate functions.
• Remote Beep & Vibrate Selection (2-Way LCD Remote): Allows selection of various beep and vibrate modes for notifications and run time reminders.

The document also includes an FCC compliance statement regarding interference and unauthorized modifications. It emphasizes the owner's responsibility to understand system operation, check its functionality, and maintain vehicle condition for safe operation, and warns against remote starting in closed garages due to carbon monoxide risk.

CrimeStopper Cool Start RS1-G5 Specifications