EasyManua.ls Logo

CrimeStopper Cool Start RS4-G5 - User Manual

CrimeStopper Cool Start RS4-G5
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
RS1-G5, RS3-G5, RS4-G5
RS4-G5 FM (1-Way System)
RS7-G5 FM (2-Way Paging System)
REMOTE START SYSTEM
OPERATING INSTRUCTIONS
CONGRATULATIONS on your choice of a Cool Start Remote Engine Starter and Keyless Entry with DP
Technology by Crimestopper Security Products Inc. This booklet contains the information necessary for operating
your system. If any questions arise, contact your installation dealer or Crimestopper Security Products Inc.
The RS1-G5, RS3-G5 & RS4-G5 system comes with (2) 1-way AM remotes
The RS4-G5 FM system comes with (2) 1-way FM remotes.
The RS7-G5 FM system comes with a 2-Way LCD Pager and a 1-Way FM remote.
OPTIONAL Features are to be connected only if desired or agreed upon by the customer and the installing dealer
i.e. Door Locks, Trunk Pop, Dome Light Illumination, Horn-Honk, Anti-Grind, etc. These features may also require
additional parts and/or labor fees. Consult with your installer beforehand to be sure of what is going to be installed
with your particular system.
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
REV 07-2014
This device complies with FCC Rules part 15. Operation is
subject to the following two conditions: 1) This device may not
cause interference, and (2) this device must accept any
interference that may be received, including interference that
may cause undesired operation. The manufacturer is not
responsible for any radio or TV interference caused by
unauthorized modification to this equipment. Such modification
could void the user's authority to operate the equipment.

Other manuals for CrimeStopper Cool Start RS4-G5

Question and Answer IconNeed help?

Do you have a question about the CrimeStopper Cool Start RS4-G5 and is the answer not in the manual?

Summary

Crimestopper Remote Start System Overview

System Models and Features

Details of different Crimestopper remote start system models and their associated remotes.

Optional System Features

Overview of optional features that may require additional parts and labor.

Operation Cautions and Warnings

Manufacturer Liability and Owner Responsibilities

Disclaimer of liability and outline of owner's responsibilities for system use and maintenance.

Critical Safety Warnings

Essential warnings regarding garage safety and potential hazards during operation.

Remote Control Operation

RS1-G5 and RS3-G5 Remote Descriptions

Descriptions of the single-button RS1-G5 and 4-button RS3-G5 remotes.

Remote Start Button Press Selection

Options for activating the remote starter via button press: double press, single press, or press and hold.

5-Button Remote Control Features

5-Button Remote Indicators and Functions

Explanation of LED indicators, AUX outputs, and valet functions for the 5-button remote.

VEH Button Usage Note

Note on using the VEH button to prevent accidental vehicle operation.

2-Way Pager Transmitter Operation

LCD Screen Icons and Side Buttons

Description of icons and functions of side buttons on the 2-way pager transmitter.

Pager Power and AUX Outputs

Instructions for powering the pager on/off and details on AUX outputs via data.

2-Way Pager Transmitter Details

Pager Transmitter Operation and Charging

General operation of the 2-way pager and instructions for charging its battery.

Setting the Clock on 2-Way LCD Remote

Step-by-step guide to setting the clock on the 2-way LCD pager.

Remote Beep and Vibrate Selection

Programming Beep;Vibrate Modes

Procedure to enter programming mode and select desired beep/vibrate feedback.

Available Beep and Vibrate Modes

Details on the six selectable modes for beep and vibrate feedback.

Status LED and Remote Engine Control

Status LED Indicators

Explanation of the LED's behavior during locking and valet mode.

Remote Engine Start Procedures

Step-by-step process for successfully starting the vehicle remotely.

Remote Engine Control Operations

Handling Unsuccessful Starts and Engine Shutoff

Procedure for unsuccessful remote start attempts and how to turn off the engine.

Entering Vehicle and Resetting Run Time

Procedure for entering a remotely started vehicle and resetting the engine run timer.

Door Locking During Remote Start Abort

Explanation of door locking behavior during remote start aborts or time-outs.

Advanced Remote Engine Control Modes

Idle Down Mode Operation

Allows vehicle to remain running after ignition key is removed for specific duration.

Exiting Vehicle and Infinity Run Mode

Procedure for using Idle Down mode and the Infinity Run mode feature.

Scheduled Remote Engine Control

Cold-Start and Timed Self-Start Modes

Configuring hourly cold-start and timed self-start modes for automatic engine operation.

Resetting Timed Self-Start Mode

Instructions for resetting or canceling the timed self-start mode.

Turbo Timer Mode

Activating Turbo Timer Mode

Procedure to activate the turbo timer for engine cool-down after driving.

Manual Transmission Mode Features

Manual Transmission Exit Procedure

Safety procedures for exiting the vehicle with manual transmission mode active.

Turbo Timer and Remote Panic

Compatibility of Turbo Timer with Manual Mode and how to activate the Remote Panic feature.

Convenience and Safety Features

Keyless Entry and Auto Lock;Unlock

Using remote control for door locks and configuring automatic lock/unlock features.

Horn Chirps and OEM Alarm Interface

Configuring horn chirps for system feedback and integrating with factory alarms.

Additional Convenience and Safety

Trunk Release, Dome Light, and Valet Mode

Activating trunk release, illuminating dome light, and managing Valet Mode.

Hood Open Safety and Brake Pedal Reset

Safety features preventing start with hood open or when brake is pressed.

Transmitter Programming (1-Button Remote)

Programming 1-Button Remotes

Step-by-step guide to learning transmitter codes for the 1-button remote.

Transmitter Programming (4 & 5-Button Remotes)

Programming 4 & 5-Button Remotes

Step-by-step guide to learning transmitter codes for 4 and 5-button remotes.

2-Vehicle Operation

Setting Up and Using 2-Vehicle Operation

Instructions for programming remotes for a second vehicle and managing multiple vehicles.

Vehicle Selection Icons and Notes

Understanding icons and important notes for operating multiple vehicles.

Remote Start Troubleshooting and Diagnostics

Factory Keyless Entry and Error Codes

Issue with factory keyless entry and interpreting remote start diagnostic error codes.

Cold Weather Performance and Warnings

How extreme cold weather affects remote start and system warnings.

Data Port and Smart Phone Integration

2-Way Data Port Features

Functionality of the 2-way data port and features it enables.

Smart Phone Data Port Integration

Connecting to MS3 module for smartphone app control of the system.

Battery Replacement (1-Button Remote)

Replacing 1-Button Remote Battery

Step-by-step guide for replacing the battery in the 1-button remote.

Battery Replacement (4-Button Remote)

Replacing 4-Button Remote Battery

Step-by-step guide for replacing the battery in the 4-button remote.

Battery Replacement (5-Button Remote)

Replacing 5-Button Remote Battery

Step-by-step guide for replacing the battery in the 5-button remote.

CrimeStopper Cool Start RS4-G5 Specifications

General IconGeneral
BrandCrimeStopper
ModelCool Start RS4-G5
CategoryRemote Starter
LanguageEnglish

Related product manuals