To Next PageTo Next Page
Need help?Do you have a question about the CrimeStopper SP-500 and is the answer not in the manual?
General| Range | Up to 1500 feet |
|---|---|
| Channels | 5 |
| Keyless Entry | Yes |
| Remote Start Functions | Yes |
| Number of Remotes Included | 2 |
| Engine Kill | Yes |
| Trunk Release | Yes |
| Panic Mode | Yes |
| Number of Buttons on Remotes | 5 |
| Alarm Features | Shock Sensor |
| Compatibility | Most vehicles |
Provides technical support and website details for assistance.
Outlines manufacturer liability, owner responsibilities, and critical safety advice for system use.
Details the 2-way remote for sending/receiving system information and feedback.
Describes the 1-way remote for basic system operation without page-back confirmation.
Step-by-step guide to set the clock on the 2-way LCD remote control.
A visual chart detailing button functions and their corresponding system actions.
Explains how to arm, disarm, and handle alarm triggers.
Details how to arm or disarm the system without audible siren chirps.
Covers prior intrusion alerts and how to activate remote panic protection.
Explains shock sensor bypass, open door warnings, and pre-warning shock protection.
Describes the automatic arming feature that engages after ignition off and door closure.
Covers optional passive locking and trunk/hatch release features.
Details the programmable auxiliary outputs for controlling accessories.
Instructions for entering/exiting Valet Mode and Valet Park Mode for vehicle servicing.
Procedure to disarm the system manually if the transmitter is lost or inoperable.
Step-by-step guide for successful remote engine start and associated confirmations.
Explains remote start confirmations and LCD pager feedback.
Handling failed remote starts and procedures for entering the vehicle with the engine running.
How to turn off the engine remotely and enter the vehicle safely.
Details modes for keeping the engine running after exiting or indefinitely.
Explains how to set the vehicle to self-start at timed intervals and how to reset the mode.
Describes remote-operated, switch-controlled, and permanent carjack protection methods.
Interprets LED flashes to diagnose the cause of the last alarm trigger.
Explains parking light flashes indicating remote start system errors or modes.
Step-by-step instructions for programming remote transmitters to the system.
Guide to program remotes for controlling a second vehicle with the system.
Details the three modes for the Turbo Timer and how to set the run time.
Visual guide on how to set the desired run time for the Turbo Timer feature.
Explains low battery indicators and procedures for replacing batteries in both remote types.
