4
QKG02C
Web: www.conglom.com/documentation/
Pre-Installation
TOOLS/MATERIALS REQUIRED (NOT SUPPLIED)
Pipe wrench
Phillips
screwdriver
Flat screwdriver
Electric drill with
1-1/4”(32mm) hole
saw
Plumber’s putty
PACKAGE CONTENTS
Carefully check the the package contents for damage and/or missing parts prior to installation. If there is any damage or if you
are missing parts, do not proceed with the installation. Report damage and/or missing parts immediately to our customer service
team at cs@conglomkb.com or 1-888-449-9194 (Service available in English and French, Monday - Friday from 8:30am - 5pm
EST). Please do not dispose of packaging before you are satised with your new waste disposer.
Stopper
Splash Guard
Sink Flange
Gasket
Supporting Plate
Top Supporting Ring
(with 3 screws)
Flange Ring
Ring Tool
Cushion Mount
Bottom Supporting Ring
Disposer Body
Discharge Elbow
Assembly
*
Part Description Quantity
Stopper 1
Removable splash guard 1
Sink ange 1
Rubber sink ange gasket 1
Flange ring 1
Ring tool 1
Supporting plate 1
Top supporting ring (with 3 screws) 1
Cushion mount 1
Part Description Quantity
Bottom supporting ring 1
Disposer body 1
Discharge Elbow Assembly Includes:
Elbow gasket
Discharge elbow
Flange elbow
Screw
1
1
1
2
*
NOTE: This waste disposer is intended to be
plugged into a grounded receptacle that is
controlled by a dedicated switch (usually wall
mounted).
To Next Page
Loading...