24
Use
Note: the product automatically enters standby mode
if it has not been used for longer than five minutes� The
product reactivates when a button is pressed or when it is
vibrated� The function display shows the current mode�
• Press the ‘MODE’ button (15) multiple times to scroll
through the various functions�
• Press and hold the ‘SET’ button (16) to pull up or reset
the saved values�
Changing basic settings
Press the ‘SET’ button (16)� The field on the display
flashes and you can make the adjustment� You can select
the settings by pressing the ‘MODE’ button (15)� Confirm
your selection by pressing the ‘SET’ button (16)� ‘Set OK’
appears on the display� You can adjust the following
basic settings in this order:
Language > Application profile > Tyre size > Unit of
length > Age > Unit of weight > Weight > Time format
> Time > Date format > Date > Maintenance interval >
Backlight ON/OFF > ETA distance > ETA mode > Unit of
temperature
GB
To Next Page
Loading...
