32
• Select ‘ON’ to add the selected function to EASY
mode� Select ‘OFF’ if you do not want to add the
selected function to EASY mode�
• Press the ‘SET’ button (16) to confirm your input� Press
the ‘MODE’ button (15) to move to the next function,
and repeat the steps above�
Turning on the backlight
If you have enabled the backlight in the basic settings,
you can temporarily turn it on by pressing the ‘SET’
button (16)� The backlight automatically turns off after a
short time�
Resetting the product
• First press and hold the ‘SET’ button (16) and then
hold the ‘MODE’ button (15) to access the setting
mode� SETTING OPEN or SETTING RESET is
displayed�
• Press the ‘MODE’ button (15) until SETTING RESET is
displayed� Confirm the product reset by pressing the
‘SET’ button (16)�
• Now you can configure the previous basic settings
(language, age, weight, time)� The other saved data
are deleted�
Note: you can select SETTING OPEN to change
settings, but not to delete them� Also see the section
‘Changing basic settings’ to make adjustments�
GB
To Next Page
Loading...
