31
SCAN: scan
Note: in scan mode the display automatically alternates
between trip distance, maximum speed, average speed
and trip time�
Note: for information on changing the settings refer to
the section ‘Changing basic settings’�
Note: press the ‘MODE’ button (15) to exit scan mode
and return to ADVANCE mode�
CUSTOMIZE mode
Aside from ADVANCE and EASY mode, you can make
your own settings in CUSTOMIZE mode�
• Press and hold the ‘MODE’ button (15) for three
seconds and then press the ‘SET’ button (16) to access
profile settings�
• Press the MODE button (15) to select EASY mode� The
word EASY flashes on the display�
• Press and hold the ‘SET’ button (16) to access CUS-
TOMIZE mode�
• Press the ‘SET’ button (16) again� Press the ‘MODE’
button (15) to enable or disable individual settings
(e�g� CLOCK)�
GB
To Next Page
Loading...
