Crivit FC-13564 - Page 30

30
CALORIE: calorie counter�
• Press and hold the ‘SET’ button (16) for three seconds
to set the calorie counter to 0�
ETASTART: estimated time of arrival
• The display shows ETASTART: press the ‘SET’ (16) and
‘MODE’ buttons (15) at the same time to activate the
ETA function�
• Press and hold the ‘SET’ button (16) for three seconds
to change the ETA distance or ETA mode�
KM +/-: kilometre counter
• Press and hold the ‘SET’ button (16) for three seconds
and press the ‘SET’ button (16) again to pull up the
kilometre counter settings� The display shows the
symbols for increasing and decreasing the number
(+ or -) and the distance value�
TIME +/-: timer�
• Press and hold the ‘SET’ button (16) for three seconds
to change the timer settings� The display shows the
symbols for increasing and decreasing the number
(+ or -) and the timer value�
GB