Crivit KH 260 - Commissioning; Programming Your Pace Length

- 10 -
Commissioning
Before the fi rst usage, remove the transparent isolation
strip from the battery compartment (see also Changing
the batteries).
Programming your pace length
Fig.: Fat burning/Number of paces
This programming is only necessary on fi rst taking the
device into use and after a battery exchange.
Repeatedly press the button MODE until you are in the •
display mode Fat burning/Number of paces.
Press the button UP to switch to the display mode Fat •
burning/Number of paces.
Press the button SET for three seconds, the standard •
pace value (60 cm) blinks.
Press the button UP to adjust the pace length •
(Adjustment range 30 – 180 cm).
Press the button SET to accept the settings and to •
depart the adjustment mode.
KH260_43209_LB4C.indb Abs1:10KH260_43209_LB4C.indb Abs1:10 26.11.2009 15:16:13 Uhr26.11.2009 15:16:13 Uhr