1. The sewing light is switched on or off by
means of the power switch (6).
2. To open the front cover, loosen
small screw with the screwdriver
supplied, as shown.
Now you can swing the front
cover to the left.
3. Only replace with a 15 watt bulb.
4. Close the cover and replace the screw after
replacing the bulb.
The accessory box is integrated in the flat bed.
By opening the cover - as shown in the picture -
you will get access to the accessories.
Accessory box
Changing the sewing lamp
Attention!
For this step, the machine must be switched off and unplugged.
2
1
3
7
Note:
Light bulbs are available at specialized
dealers.
To Next Page
Loading...