9
Playing A CD
Skip Forward And Reverse
Search Forward And Reverse During Play
CD Operation
1 Select the FUNCTION SWITCH (4) to select CD
mode.
2 Press the OPEN/CLOSE BUTTON (17) to open
the CD DRAWER (11). Place a disc in the tray
with the labeled side of the disc facing up.
3 Press the OPEN/CLOSE BUTTON (17) again
to close the CD DRAWER (11). The display will
show "--" for a few seconds, then the total number
of tracks on the disc will be displayed. "00" will
be shown when there is no disc inside the unit.
4 Press the PLAY/PAUSE BUTTON (7) to start
playback. The PLAY/PAUSE INDICATOR (6)
will light up.
5 Adjust the VOLUME KNOB (3) to the desired
volume level.
6 To pause playback, press the PLAY/PAUSE
BUTTON(7). The PLAY/PAUSE INDICATOR
(6) will flash. Press the PLAY/PAUSE BUTTON
(7) again to resume playback.
7 To stop playback, press the STOP BUTTON (8)
and the PLAY/PAUSE INDICATOR (6) will go
off.
1 Press the FORWARD SKIP BUTTON (16) or
the BACKWARD SKIP BUTTON (15) to select
a track.
2 Press the PLAY/PAUSE BUTTON (7) to start
playing the selected track.
PLAYBACK
1 Press and hold the FORWARD SKIP BUTTON
(16) or the BACKWARD SKIP BUTTON (15) to
search forward or backward through the selected
track.
2 Release the button at the desired point, playback
will resume automatically.
To Next Page
Loading...
Need help?
General