Crosley Tech Series - General; Troubleshooting Guide

General
Troubleshooting
There is no Power
1 Make sure radio is plugged in correctly.
2 The unit is not turned on: Rotate the VOLUME
ON/OFF KNOB from the OFF position past the
“click” to turn on the unit.
There is no Sound
1 Check the volume level by turning the VOLUME
ON/OFF KNOB.
2 Make sure headphones are not connected to
the unit.
3 Check the position of the FUNCTION SWITCH.
Turntable will not work
4 Make sure the FUNCTION SWITCH is set to
phono.
2 Try moving the tone arm to the right until you
hear a click.
3 Make sure the protective needle cover is
removed.
11