2
5.2. Indoor operation
6、 Checking Before Started
6.1．Check gasoline engine oil
6.2． Fuel check
6.3． Oil pipe check
9
9
9
9
9
15. Complete Set Specification
Table
16、 Transportation and storage
17、 Quality Guarantee
15
15
15
1、 Brief introduction to CUB 190 Gasoline Welding Generator
CUB 190 Gasoline welding generator is using gasoline engine for power generating.
Gasoline chemical energy is transformed to mechanical energy, then to electric energy. The
product could be used as welder and generator. The advantage is that it could not be
influenced by the power grids, also it can be used at no power supply field for electric generating
and welding, which is necessary equipment for mining and mechanical engineering, and
also could be applied to enterprise and public institution.
CUB 190 Gasoline welding generator function features:
1. Power output: 115/230V,60Hz, 2.2KW;
2. Welding current: 55A-190A;
3. Electrode diameter: 1.6-4mm;
4. Welding current is adjustable by knob;
2. Safety Operation
2.1 Safety Notice
⑴ Electric shock may cause death
● Wear dry labor protection appliance;● Don’t touch work piece or to
ground line；
● Don’t touch electriferous parts； ● Don’t touch “+” and “–”；
● Use recommended welding cable; ● Earth cable clamp should be
near welding area;
● Close power output main switch during welding.
⑵ Exhaust gas from generating and welding is hazardous to health
● Read generator and welding rods spec. carefully;
● Keep away from exhaust gas；
● Exhaust gas may cause serious nausea, dizziness, even death;
● Work in house, keep good ventilation, or wear respiratory protective
devices;
● Work outside, choose clear field with good ventilation.
To Next Page
Loading...