EasyManua.ls Logo

Crossfire 190CUB - Operators Self-Protection; Operators Notices

Default Icon
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Welding may cause fire or explosion
Do not do welding work near flammable and explosive materials;
Allocate the fire extinguisher in case of fire;
No welding at the parts’ flammable surface;
No welding sealed vessel.
Parts may cause serious personal injury during working
Keep away from working parts;
Switch off before repairing machine;
Lock all machine doors, panels, covers and protector or be located at
safe position.
2.2 Operator’s self-protection
* Be sure to follow labor’s safety and sanitation rules, wear suitable labor protection
appliance in case of any injury to eyes and skin.
* Shield the head with protective mask during welding work, and watch arc only
through filter glass window on the mask.
* No touch on work piece in case of any electric shock accident in welding;
* No touching on the both poles (Electrode holder pole and work piece pole) from
welder output at the same time by any parts of body without insulation.
* No welding vessel with flammable and explosive materials or sealed vessel.
* No operating at very humid filed.
* Prevent flying sparks from hurting people.
* No touching on any position of engine or load by hands no matter they are wet or
not.
* Exhaust gas from welding and generating is harmful to health. Keep good
ventilation.
* Welding arc light is harmful to health, keep eyes away from arc light.
* Do not approach the machine working parts with the hands, hair, tools or loose
clothes.
* Only professional staff should install, test and repair the machine.
* When switch off engine, repairing work, fuel and engine oil charging should be start
till engine cooling.
* No smoking, and keep away from any flame when charging fuel.
2.3 Operator’s notice
* CUB 190 gasoline welding generator belongs to electrical products. Do not switch or
modulate over exert in case of damage to components.
* Check welding cable every time before work, connection right and reliable or not,
earth connection reliable or not.
* Exhaust smoke is not good for health. Operation should be at ventilation and smoke
evacuation area.