EasyManua.ls Logo

Crown B Series User Manual

Crown B Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
New Bremen, Ohio 45869 USA © 2002 PF12507-WEB Rev. 6/06 Printed in U.S.A.
This operator manual
has information for
all models of series
B plus some options and
accessories. Some of the
illustrations and information
may not apply to your truck.
The most important component is you.
Operator Manual
Question and Answer IconNeed help?

Do you have a question about the Crown B Series and is the answer not in the manual?

Crown B Series Specifications

General IconGeneral
ModelB Series
TypeElectric
Power SourceElectric
Voltage36V or 48V Depending on Model
Battery Voltage36V or 48V Depending on Model
Tire TypePneumatic or Cushion
Mast Type2-Stage or 3-Stage

Summary

Operator Training Requirement

Mandatory Training and Authorization

Explains the necessity of being trained and authorized to operate the lift truck for safety.

Safety Warnings for Untrained Operators

Highlights severe risks of injury or death for untrained operators.

Protect Yourself

Use Your Truck Carefully

Guidelines for careful operation, including looking where you're going and keeping feet clear.

Use Your Truck Safely

Instructions for safe truck usage, focusing on keeping clear of moving parts and proper pre-operation steps.

Avoid Falls and Tipovers

Advice on preventing accidents related to falls and tipovers, such as staying away from dock edges.

Understanding Your Lift Truck

What's in it for You

Explains the manual's benefits and guides for understanding truck operation and safety.

Your Walkie Lift Truck

Introduction to walkie lift trucks, their capabilities, and basic operational differences from automobiles.

Lift Truck Components

Identifies key parts of the lift truck through an illustrated diagram.

Capacity and Load Handling

Capacity & Load Center

Defines truck capacity and load center, emphasizing even load distribution to prevent tipping.

Capacity Plate

Details information found on the capacity plate and how to read it for safe operation.

Safe Operation Practices

Traveling

Safe procedures for traveling with the truck, including standard and tow handle options.

Controls

Explanation of the primary controls for raising, lowering, and disconnecting power.

Daily Safety Check

Procedure for conducting a thorough pre-operation inspection of the lift truck.

Be a Safe Operator

Guidance on operator readiness, alertness, hazard awareness, and safe operating procedures.

Battery Maintenance and Warnings

Battery Maintenance

Information on checking batteries, using chargers, and understanding the battery charge meter.

Warning Labels

Highlights the importance of reading and obeying all warning labels on the truck.

Related product manuals