To Next PageTo Next Page
Need help?Do you have a question about the Crown TSP Series and is the answer not in the manual?
General| Power Source | Electric |
|---|---|
| Operator Type | Stand-Up Rider |
| Voltage | 36V or 48V |
| Mast Type | Triplex or Quad |
| Travel Speed | Varies by model; consult specific model specifications |
Legal requirement for operating this truck and potential consequences of lack of training.
Details included on the truck's capacity plate, such as serial number and load limits.
Explanation of how lift height and load center affect lifting capacity.
Procedure for turning the truck on, testing indicators, and turning it off.
How to disconnect the battery and cut power, and when to use this function.
Choice of operating the truck from a seated or standing position.
Explanation of how foot brake and interlock pedals differ between positions.
Description of foot brake pedal locations and operation in seated/standing positions.
How to engage and disengage the parking brake and when to use it.
Rules for side gate operation to prevent accidents and ensure truck function.
Guidelines for using operator harness and tether for elevated work with open gates.
How to operate the handle for moving forks and carriage left or right.
How to operate the handle to pivot forks clockwise or counter-clockwise.
Operating the handle to move the operator platform and forks up or down.
Using the button and handle to raise or lower only the forks.
Understanding truck steering direction, not like an automobile.
How to rotate the twist grip to control forward and reverse travel speed.
Using the twist grip to slow down or stop the truck by reversing direction.
Procedure for engaging guided driving by approaching and centering on the guidance wire.
Tips for safe operation while following the guidance wire.
Ensuring operator training/readiness and performing pre-operation truck checks.
Maintaining awareness, proper body positioning, and safe driving practices.
Steps and precautions for installing or replacing truck batteries.
Final checks and procedures after batteries have been installed.
