Need help?Do you have a question about the Crown SP 3500 Series and is the answer not in the manual?
General| Power Source | Electric |
|---|---|
| Drive Motor | AC |
| Battery Voltage | 36V |
| Tire Type | Polyurethane |
| Operator Type | Stand-up |
| Maximum Load Capacity | 3500 lb (1588 kg) |
Key safety warnings about falling, crushing, and operational hazards.
Legal requirement for operator training and certification for safe operation.
Proper use of operator harness and lanyard for fall protection.
Guidelines for safe driving, awareness of surroundings, and truck usage.
Precautions to prevent falls from platform and truck tip-overs.
Instructions for careful driving, maintaining control, and avoiding hazards.
How to use the manual, locate information, and understand key features.
Overview of stockpicker design, comparison to other trucks, and basic operation.
Explanation of truck lifting capacity based on height and load center.
Explanation of load center and its importance for stability.
Importance of evenly distributing loads to prevent tip-overs.
Details found on the capacity plate and how to read it.
Explanation of battery status, message panel, and warning lights on the display.
Interpretation of various optional indicator lights for truck operations.
Procedures for acquiring and operating the truck in wire guidance mode.
How to turn the truck on/off and use the emergency disconnect.
Operation of the foot brake, travel control, and plugging.
Methods for traveling, plugging, and understanding steering/travel restrictions.
How to raise/lower the platform, use the override switch, and handle cutouts.
Safety measures for the platform, side gates, and pallet securing.
Required pre-operation checks and test drives for truck safety.
Essential habits for operators to ensure safety and alertness.
Procedures and hazards associated with truck battery maintenance.
Understanding and obeying important warning labels on the truck.
To Next Page
