31 Be a Safe Driver
Be a Safe Driver
MAKE SURE YOU ARE READY TO DRIVE
• Do not use this truck unless you are trained
and certified.
• Be certain you understand how your truck works and
the hazards that go with it. Don't drive the truck if
you have any doubts.
• Know the capacity of your truck (Load Weight, Load
Center and Lift Height). Make certain you use the
correct units of measure.
• Some trucks are not allowed in areas where there are
fire hazards. Be certain your truck is the correct fire
safety type for the area.
• Make sure your hands and shoes are clean and dry,
and your clothing is proper for the job.
MAKE SURE YOUR TRUCK IS READY
• Inspect your truck before using it (see pages 29 and
30). If it's not working right, or something is broken,
report the problem. Don't use the truck.
• In an open area, test the braking and plugging.
Check at a slow travel speed first, then a faster
one. Know the distance it takes to stop before you
start work.
The most
important
component
is you.
To Next Page
Loading...