Crown ce 4000 - Back Panel Assembly

CE 4000 Service Manual
Parts 5-4
130485-1 Rev. B
©2002 Crown Audio, Inc.
Item Quantity Description Part # (CPN)
13 1 LABEL, VDE EARTH GROUND D 7037-1
12 2 8-32 HEX NUT W/BELLE A11056-2
11 1 WIRE, 14 GRN/YEL RING X 6.0 X RING A11544-G060G
10 1 SHIELD, CE400EMI FILTER 128229-7
9 1 WIRE, 14 BLU FAST X 21 X FLAG A11386-HZ10M
8 1 WIRE, 14 BRN FAST X 21 X FLAG 103448-A21OM
7 4 STAND, 6-32 X 1.9375 HEX MALE/FEM A12095-12
6 1 PWA, CE EMI FILTER See section 5.4
5 1 WIRE, 14 GRN/YEL RING X 6.0 X FLAG A11544-GO60M
4 1 IEC SNAP IN 15A UL/10A VDE 102650-1
3 8 SCREW, 6-32 X .250 MACH TORX PNHD 103436-70604
2 1 FAN, 120 X 120 X 38mm 12VDC 140CFM 126992-2
1 1 PANEL, CE4000 BACK AP/PC/PP 127227-12
ASM. NUMBER:
130251-2
RECOMMENDED ASSEMBLY TORQUES
ITEM NO. C.P.N. TORQUE SETTINGS
3 103436-70604 13-15 IN LBS.
12 A11056-2 10-12 IN LBS.
5.3.2 Back Panel Assembly
Refer to Figure 5.2 for Exploded View
Figure 5.2
CE4000 Back Panel Assembly (Exploded View)
NOTES:
1) CONNECT ITEM 8 TO “J9” & ITEM 9 TO “J10”
ON ITEM 6 PWA PRIOR TO ASSEMBLING ITEM
10.