EasyManua.ls Logo

Crown I-Tech I-T6000 User Manual

Crown I-Tech I-T6000
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
I-Tech Application Guide 1
Application Guide
Application Guide
© 2005 by Crown Audio Inc., 1718 W. Mishawaka Rd., Elkhart, IN 46517-9439 U.S.A.
Telephone: 574-294-8000. Fax: 574-294-8329.
www.crownaudio.com
Trademark Notice: Grounded Bridge™ is a trademark, and Crown
®
and Macro-Tech
®
are registered
trademarks of Crown International.
Other trademarks are the property of their respective owners.
137327-3A
09/05

Other manuals for Crown I-Tech I-T6000

Question and Answer IconNeed help?

Do you have a question about the Crown I-Tech I-T6000 and is the answer not in the manual?

Crown I-Tech I-T6000 Specifications

General IconGeneral
Channels2
2 Ohms Power Per Channel3000W
4 Ohms Bridged Power6000W
Input Impedance20 kOhms balanced, 10 kOhms unbalanced
Input Sensitivity1.4V
Damping Factor> 500
Frequency Response20 Hz - 20 kHz
Signal to Noise Ratio> 105 dB
Connectors InputXLR
Connectors OutputNeutrik Speakon
Height3.5 inches (2U)
Dimensions19" x 3.5" x 16.2"
Weight28 lbs
Power Requirements100V-240V ~ 50/60 Hz

Summary

Power and Thermal Information

Output Power Specifications

Lists output power for I-Tech models across different impedance loads.

AC Power Draw and Thermal Dissipation

Details power consumption and heat output based on load conditions.

Wiring Recommendations

Input Wiring Options

Covers analog and AES/EBU input connections for I-Tech amplifiers.

Output Wiring and Cable Loss

Explains binding post and Speakon output connectors and line loss.

Network Wiring and IQ Network Setup

Details how to connect I-Tech amps via IQ Network for setup and control.

I-Tech Settings and Configuration

Setting Sensitivity and Gain

Optimizing gain structure for signal-to-noise ratio and output levels.

I-Tech and JBL VerTec System Integration

Related product manuals