Crown Macro-Tech MA-600 - Main Chassis Assembly

Macro-Tech 600 Amplifier Service Manual
19
Parts List (Non-Module)
Chassis Front Assembly (cont.)
CPN ITEM QTY
M46054-9 Grill Assembly. Includes Grill and Filters. 1
M46504-3 Btm Grill Assembly. Includes Grill, Filters, and Btm Cvr 1
Note:Note:
Note:Note:
Note: Old style grills with the one piece filter behind the grill are no longer available. If an old amplifer
needs a new grill, the only option is to convert it to the new style by ordering part number M46504-3, which
includes the bottom cover. New grills will not fit onto old bottom covers.
Main Chassis Assembly
CPN ITEM QTY
D 8501-5 Cover, Top 1
F12609-8 Bottom Cover 1
C10451-0 Cover Screws 16
M44018-6 PIP-FX 1
F12693-2 Back Panel 1
P10286-6 PIP Interconnect Board 1
C 4508-5 16 Pin IC Socket 1
C 6821-0 22 Contact Edge Card Connector 1
C 7705-4 Flat Cable Clamp 1
D 6899-5 PIP Daisy Ribbon Connector 1
D 7623-8 10" 22AWG Cable with Terminals 1
H42918-5 Display Ribbon Cable, 3 Cond., 8" 1
C 6965-5 Screw, 6-32 X .1562 PH Binder HD 4
A10086-10604 Screw, 6-32 X .25 RDHD 3
A10086-70806 Screw, 8-32 X .37 RDHD 1
A10094-3 #6 Int. Star Washer, Black 3
A10094-6 #8 Int. Star Lockwasher 4
A10094-8 #10 Int. Tooth Lockwasher, Zinc 12
A10099-7 #10 Nylon Shldr. Washer 8
A10100-16 Washer, 7/16OD X .203ID 8
A10101-19 Washer, .500OD X .195ID Fiber 2
A10102-8 Hex Nut, 10-32, Zinc 12
A10109-10822 Screw, 8-18 X 1.375 PH 2
A10110-70812 Screw, 8-32 X .750 Taptite 2
A10192-1 Snap Bushing, OCB .500 4
C 1811-6 4" Cable Tie 4
C 1813-2 7.5" Cable Tie & Clamp 2
C 3163-0 505 Sldr. Lug, #6 Hole 1
C 6912-7 Tention Retaining Board Support 2
C 6913-5 1" Spacer Toggle Nut, Plastic 2
C 6914-3 .75" Spacer Toggle Nut, Plastic 2
C 9491-9 Screw, 6-32 X .312 Pan Head 4
C 9953-8 Screw, 6-20 X .312 Pan Head 6
C10111-0 Button, MTG Richco 2
D 6301A0 Gasket, Transformer Air Seal 2
D 7600-6 Ground Strap, Dual Banana 1
D 7784-8 Voltage Gain Label 1
H43424-3 Tube, .75 X 3.5 Slit 1
H43451-6 Tube, .375 X 3.5 1