CRT ALPHA - Specific Functions

The VOX function allows transmitting by speaking into the original
microphone without pressing the PTT switch.
Press [
PTT
] + [
EMG
] key to activate VOX function, LCD displays
microphone icon, and then press [
PTT
] + [
EMG
] key to disable VOX
function. The microphone icon disappeared.
Note:
When turn on VOX, the mic icon flashes.
This function allows you to adjust the volume of your walkie-talkie.
(1)
Start the intercom function (see "
intercom
" on page 8).
(2)
Hold down the PTT switch, then the [up] key increases or the [down] key
decreases the Talkback Level
(3)
Release PTT switch and save Talkback Level.
(1)
Hold to power on radio, until LCD displays the norms.
(2)
Short press or or microphone [UP ]/[DN].
(3)
Power off and power on again.
3.8
VOX function
.....................................................................................
3.9
Talkback Level
...............................................................................
3.10
Norms Control
................................................................................
MODE FM AM --
EU 40 Ch (4W) 40 Ch (4W) BE,BG,CH,CY,DK,EE,
ES,FI,
FR,GB,EL,IE,IS,IT,LT,L
U,LV,NO,PT,RO,SE
PL -5 KHz 40 Ch
(4W)
-5 KHz 40 Ch
(4W)
PL
DE 80 Ch (4W) 40 Ch (4W) DE
CE 40 Ch (4W) - AT,CZ,HU,MT,SI,SK
U CEPT 40 Ch
+ENG 40 Ch
(4W)
- GB
IN 27 Ch (4W) 27 Ch (4W) IN
I2 36 Ch (4W) 36 Ch (4W) IT
- 8 -