Maintenance Of The Smokehead
Serial numbers
Serial number locations are as follows:
•
Smokehead internal - Underneath the lens housing (remove end
cap for access).
•
Smokehead external – on underside of Smokehead.
Checking the Smokehead serial number
CLEANING SAMPLING PIPES
Under normal circumstances the sampling head does not require cleaning. If a sampling pipe
becomes restricted with deposits, the test results can be affected.
To clean a sampling pipe, remove the sample probe from the smokehead. Blow through the
sample pipe only, using compressed air. DO NOT BLOW THROUGH THE SMOKEHEAD.
WARNING:
Wear eye protection and provide a suitable container to catch the
soot that will be blown out from Sample Pipe. DO NOT use
compressed air on the Smokehead body.
To Next Page
Loading...
