MODEL 2740
INSTALLATION
The 2740 is a high capacity, compact footprint, and self-contained parts washer. The only
external hookup is a 220VAC, 1PH, 24A minimum dedicated electrical supply line. Floor plan
layout should include adequate access for maintenance, service, and repair. Vertical
clearance should allow full opening and closing of the lid without obstruction. Install your
parts cleaner on a flat, level surface in an area provided with adequate ventilation. Local
exhaust ventilation should be used in areas of high vapor concentration. Provisions for
determining and maintaining adequate ventilation are the responsibility of the operator.
WARNING! This unit is NOT intended for outdoor operation.
PRODUCT DIMENSIONS
All dimensions are in inches.
WEIGHT (Estimate)
Dry Weight: 390 lbs
Wet Weight: 720 lbs
(at 40 gallons)
5
Heritage-Crystal Clean, LLC 2000 Center Drive, Suite East C300 Hoffman Estates, IL 60192 877-938-7948
To Next Page
Loading...