Bulaşık Yıkama Makineleri - Professional Dishwashers
Montaj ve Kullanım Kılavuzu - Installation and User's Guide
28
program doesn’t continue from the point it remains. The dishwashing starts from
the beginning when door is reclosed.
Switch the button to position (4) in order to discharge the water. For CRW 500
and CRW 400 models the switch (7) must be pressed and hold until water fully
drained. This switch does nothing for the machines without drain pump. Before
start drainage, don’t forget to remove tap inside device. When drainage is
completed, insert tap again to its place before use of device. When water of
device is discharged, terminate drainage process from switch; do not let drainage
process of device without water long time.
Basket placements
To Next Page
Loading...