(12) DO NOT DISTURB (DND): If you do not want to receive any calls ,you can enable this feature. To do so:
Now if any other extension calls your extension, he will get error tone
Note: A broken dial tone is always heard on the extension with this feature enabled.
However you can make outgoing calls normally from this extn.
(13) CALL FORWARD:
(A) CALL FORWARD (ALL CALLS): You can forward all calls to any other pre-assigned extension. This is useful when you are
moving to Some other extension and do not want your calls to remain un-attended. To do so:
Now anyone dialing your number shall be connected to this forwarded extension.
Note: A broken dial tone is always heard on the extension with this feature enabled.
However you can make outgoing calls normally from this extn.
(B) CALL FORWARD (if your extn goes no reply) : With this feature, if you do nat respond to an incoming call with in 20 sec
time, the call will be automatically forwarded to programmed extn. To do so:
Now in No Reply condition, anyone dialing your number shall be connected to the forwarded extension.
Note: A broken dial tone is always heard on the extension with this feature enabled.
However you can make outgoing calls normally from this extn.
(C) CALL FORWARD (Only if your extn is Busy) : With this feature, only when you are busy and anyone dial your extn., the call
will be automatically forwarded to programmed extn. To do so:
Now in busy condition, anyone dialing your number shall be connected to the forwarded extension.
Note: A broken dial tone is always heard on the extension with this feature enabled.
However you can make outgoing calls normally from this extn.
To Next Page
Loading...