Crystal dB 32 - Follow Me; Cancellation of Follow Me; Barge-In (With Warning Tone); Call Toggle

dB 32 User Guide
(14) FOLLOW ME: This is useful when you are already moved at any other extension and do not wants your calls to
remain unattended. Now utilizes this function to pull up your all calls at any other desired extension. To do so:
Now anyone dialing your number shall be connected to this followed extension.
Note: 1) A broken dial tone is always heard on the extension with this feature enabled.
2) Follow me shall function active only after you have changed your personal (default is 1111)
(15) BARGE–IN (WITH WARNING TONE): With this facility you can convey priority message to a busy extension. To do so-
❖ Barge-in shall not work if the busy extension is in Dialing / Ringing / Conference mode.
(16) CALL TOGGLE: You can toggle between your current call (Intercom / JN) & a 2
nd
call on hold .
❖ Barge-in shall not work if the busy extension is in Dialing / Ringing / Conference mode.
(17) MONITOR: With this facility you can monitor conversation of two extensions without any indication (short beeps) to busy extn.
(18) HOTLINE EXTN. / JN : This feature comes in useful when a particular extension / jn is to be used repeatedly. To do so-
Step
Procedure
Ton e s
Abbreviations
1
Lift the handset of existing other extension
Internal Dial Tone
2
Dial 722 + XX + YYYY
Confirmation Tone
XX = Extn. No. to be Followed
(i.e. yourself extn. no.)
YYYY= Self Password
3
Hang up,
Cancellation of Follow Me
Lift handset (Self Extension) & Dial 720, get confirmation tone
Step
Procedure
Ton e s
Abbreviations
1
Lift handset
Internal Dial Tone
2
Dial desired Extension- If busy
Busy Tone
Busy with intercom or trunk call
3
On Busy tone dial 83
Warn tone to All
2 sec Beep Beep tone before intercept
4
Start conversation
Step
Procedure
Ton e s
Abbreviations
1
Lift handset
Internal Dial Tone
2
Dial desired Extension- If busy
Busy Tone
Busy with intercom or trunk call
3
On Busy tone dial 83
Warn tone to All
2 sec Beep Beep tone before intercept
4
Start conversation
5
Now Press Flash + Dial 1 for Call Toggle
6
Hang up when conversation is over
Step
Procedure
Ton e s
Abbreviations
1
Lift handset
Internal Dial Tone
2
Dial desired Extension- If busy
Busy Tone
Busy with intercom or trunk call
3
On Busy tone dial 80
No Warning tone
Now you can monitor the call (after 1
sec)
4
Hang up
Step
Procedure
Ton e s
Abbreviations
1
Lift Hand set
Internal Dial Tone
2
Dial 16 + 1 + XX (Extension No.)
Confirmation Tone
XX = Extn. Number without delay time
Decibel 32 Page ! 7