(22) DYNAMICLOCK: An extension can use dynamic lock to protect misuse of outgoing trunk call’s from his extn. User extension
will be automatically locked as per defined COS (Class of service) level after respective delay time. To do so:
To set Dynamic Lock
To open Dynamic Lock
To Change self password
(23) Alarm:
Note:- Daily Alarm on your extension shall now ring daily at set specified time till it is not cancelled.
(24) Global Memory Dialing: 450 no (90 * 5) of Central Memory Pool (88101 to 88995) for external call can be commonly
accessed by all Extensions. Each stored no. can be max.16 digits (including STD / ISD codes and
external no).
Note- Refer programming manual to set Global Memory Location.
Dial “ 81” + XXXX (self password) + Y (COS level )
+ MM (Time Delay)
Default XXXX is 1111,
Y = 0 or 1/2 as intercom or STD/ISD
level
MM = 01 to 99 sec Delay
Dial “ 82” + self password (xxxx)
XXXX = Old self password ZZZZ = New self Password
Duration Alarm
To set for extn. to ring at Duration time,
Dial 78+1+ XX
One Time Alarm
To set for extn. to ring at specified one time,
Dial 78+2+HHMM
HH MM = 24 hr format time
Repeat / Daily Alarm
To set for extn. to ring daily at specified time,
Dial 78+3+HHMM
HH MM = 24 hr format time
Remote Alarm
To set alarm for some other extn. to get alarm ring
one time or daily time,
Dial 784+ XX+Y+HHMM
XX = any other extn. no.
Y = 1 (duration), 2 ( one time)
3 ( daily)
HH MM = 24 hr format time
To cancel all Daily alarm
Dial any one memory location (88101 to 88995)
Particular Memory group location
(101 to 105), (201 to 205),……..
(991 to 995)
To Next Page
Loading...